Don't forget to join us on facebook!

Mod Thrustmaster Steering wheel Acelith
MOD - Rim BMW DTM for T300 GTE

Acelith Design

MOD - Rim BMW DTM for T300 GTE

Regular price €54,90
Unit price  per 
Tax included. Shipping calculated at checkout.

Shipment within 3 days after order.
GLS or SDA courier in Italy, UPS for foreign countries.
 
MOD - Steering wheel inspired by the BMW DTM - For Thrustmaster T300 GTE, by Acelith Design.
  • Compatible with PC and Console (PS4 - Xbox One etc.), as the steering wheel electronics are not altered.  
  • Steel plate, chemically treated to resist oxidation OR aluminium; covered with vinyl that simulates carbon fiber;
  • 3D Printed PLA handles already installed, easy to cover. Find out here (FAQ #2, important) how to cover them. We strongly recommend that you do so;
  • Diameter of 28 cm;
  • Stickers not applied so you can customize them; BMW sticker (replica) for free. You can glue it in the center;
  • For mounting in 2 minutes;
  • Laser cut plate, mod assembled by hand, in Italy.

This mod is compatible with the following steering wheels:

  • T300 GTE;
  • T300 599XX alcantara;
  • TM Open Wheel Add-on (TS PC Racer);
  • TX Racing Wheel Leather Edition (3 holes unfortunately remain unused);
  • Other steering wheels with the same HUB and keys layout. Contact me if your steering wheel is not on the list.

The kit does NOT include the thrustmaster hub. 

All original buttons will be perfectly usable. 

Why 28cm of diameter?
The Thrustmaster T300 is designed for a 28 cm rim. In this way the motor will work perfectly.

How to install the mod?


Mounting this mod is very easy. Explaining it is much more complex than doing it. 

  1. Unplug the steering wheel from its base and place it on a table;
  2. At the back, you have to unscrew the two small screws under the paddles. If you have a T300 RS, you also need to unscrew a third screw, located in the lower centre (opposite the PS button);
  3. Unscrew the 6 screws located around the hub from the front of the steering wheel;
  4. Remove the rim. Be careful to leave the directional cross, the buttons and the small spring in place;
  5. Put the modified rim in place of the original one;
  6. Secure it using the 6 front screws you unscrewed earlier. The two small screws are no longer needed. Keep them in case you want to reassemble the original rim.
  7. Have fun!